1/4" Screw x 1/4" Push Fit
1/4"Filter Housing Connector
This filter housing connector is used to connect 1/4" tubing to a filter cartridge / filter housing with 1/4" ports
Ideal for connecting water pipe to filters and filter housings used for fridges, water coolers, and under sink water filters
NSF certified push fitting collet - ensuring a leak free connection every time
This filter housing connector is used to screw into a filter cartridge / filter housing with 1/4" ports. The connector will provide a 1/4" push fitting connection where 1/4" tubing can simply be pushed in to connect. - If your existing tubing / ports are larger than this please see "Accessories" tab for more sizes.
This connector is for use with water pipe / tubing which is 1/4" in outer diameter - this is the standard size used on most water filter systems, water coolers, and american fridge freezers.
It is recommended to use PTFE plumbing tape on the thread of the connector when connecting to your existing filter / filter housing to ensure a water tight seal.
Push fitting collet part materials meet NSF (National Science Foundation) standard, ensuring there are no leaks.
|Fittings Type||Push fit / NPTF|
Mr RI could not stop my old connector leaking.this new 1/4" Screw x 1/4" Push Fit Filter Housing Connector.has sealed without issue
Mick HOrdered two of this fitting to rectify a leaking water filter. Delivery was quick and the parts were easy to fit and did the job well. Would recommend using Water Filter Man and will use them again for other items.