AquaHouse Direct to Tap Under Sink Water Filter System

Upgrade your existing tap to filtered water! Designed to be connected directly to the cold water feed on your existing kitchen tap to make all of your cold water filtered. Can also be used to replace existing filter systems, connected to water dispensers, beverage dispensers, filter taps, etc.

Simple DIY installation* and filter changes using the supplied 1/2" BSP and 3/8" BSP fittings & hoses both included

*dependant upon existing pipework

Features

• Greatly improved taste and odour of drinking water
• Reduces levels of Chlorine, heavy metals, and many more chemical compounds (if present) from the water
• Supplied complete with hoses and adaptors to fit both 1/2" BSP and 3/8" BSP threads for standard UK and European plumbing.
• Filter uses a simple twist lock design for easy DIY filter changes and quick installation
• High capacity filter life of up to 80,000 litres
• Minimal impact on pressure with max flow of up to 9.5 Litres per minute *dependant upon incoming water pressure
• Low maintenance, economical, and environmentally friendly due to long filter life

Specification

• Height: 35cm (allow up to 45cm height clearance for filter changes)
• Diameter: 11.3cm (allow up to 22cm width clearance for pipes)
• Flow rate: Up to 9.5 Litre per minute* dependant upon incoming water pressure
• Max temperature: 5-38C (to be used on cold water mains only)
• Max pressure: 6.8 bar
• Connections: Filter head unit 3/8" Push fitting connection, 2x hoses with 3/8" stem to 3/8" BSP male / female thread + adaptors to 1/2" BSP also included for both male and female connection.
• Certification: Tested by IAMPO to NSF/ANSI 42-2021 standard